 |
| |
| WMC-PT (Manual Call Point - Press Type) |
| |
 |
|
Features:
• Metal housing
• Finish : Signal red
• Size : 90mm x 90mm x 56mm
• Comes with 470 ohm resistor for monitoring
|
|
| |
|
| WMC-HT (Manual Call Point - Hammer type) |
| |
 |
|
Features:
• Metal housing
• Finish : Signal red
• Size : 90mm x 90mm x 56mm
• Stainless steel hammer & chain for breaking glass
• Comes with 470 ohm resistor for monitoring
|
|
| |
|
| WES-2400 (Electronic Sounder) |
| |
| |
|
Features:
• Easy to install design
• Operating voltage and current
• Typical voltage: DC 24V Current: 40mA
• Size(mm): 100 mm(L) x 100 mm(W) x 75 mm(H)
• Color: Red
|
|
| |
|
| WPS-10 (Power Supply Units) |
| |
 |
|
Features:
• Voltage rating: 12 V / 24 V
• Current rating: 1 A, 2 A and 5 A
• Input voltage : 220~240 V AC
• Attractive white metal housing
|
|
| |
|
| WSL-035 (Strobe Light) |
| |
 |
|
Features:
• Dimensions : 185x130x70mm
• Max Alarm Volume : ~100dB Working
• surrounding humidity : ~95%
• Operating temper : -10~+55 C
• Working voltage : 22-30DC for use with fire alarm system
• Current : 70mA Flash
• intensity : ~1.2WS
• Flash cycle : < 2.0sec Frequency
• life of flash lamp : ~30,000 times
• 3 kinds of Alarm sound : Ambulance, Fire Engine, Police vehicle Different
colors are available
|
|
| |
|
| WMCP-026 (Manual Call Point - New Type) |
| |
 |
|
Features:
• Dimensions : 90x90x45mm
• Operating temperature : -20°C ~ +50°C
• Voltage : DC 18-32V Alarm
• Current : 5mA < 1 < 10mA
• Color : Red
|
|
| |
|
| WUV-001 (Service Alert) |
| |
 |
|
Features:
• To alert users to call their service company
• To alert users to call AC maintenance
• Service for UV bulbs service
• To alert elderly people to take medicine
• To alert staff in the hospital to take care of patience when time comes etc
|
|
| |
|
| WRM-100 (Relay Module for WSD 827-I) |
| |
| |
|
Features:
• The relay module for WSD 827-I models (with Interconnection function only)
• This module makes the Stand-Alone Photoelectric Smoke Detector WSD 827-I (with interconnect)
capable of communicating to the fire station, alert users, dial a pre-programmed number etc
|
|
| |
|
| WLD-FS97P (Mini Siren with Strobe) |
| |
 |
|
Features:
• This model intends to could substitute traditional mechanical fire alarm bells
• Waterproof & easy to install design
• Operating voltage and current :
12V-28VDC, (typical voltage : DC 24V)
Siren : 40mA, strobe : 250mA (at DC 24V)
• Siren tone : sweep
• Siren output : 105 ± 3dB(at 1 meter)
• Size(mm): 82(L) x 82(W) x 34(H)
• Power cord: 1 ft. (AWG 24) in general
|
|
| |
|
| WLD-582 (Alarm with Strobe and Battery Backup Bell Box) |
| |
 |
|
Features:
• Built-in anti-tamper switch/with feed-back terminal
• Weatherproof, UV-proof, hi-impact (3mm thick polycarbonate housing)
• Auto-recharging battery circuit
• Powerful siren output : 115 ± 3dB (at 1 foot)
• Operating voltage current :
10V-14V DC, (typical voltage : DC 12V)
Siren : 150mA, strobe : 250mA (at DC 12V)
• Battery capacity : 280mAH
• Size (mm) : 241 x 160 x 51 (L x W x H)
• Optional power cord : four-thread telephone cord, 10 meters long
|
|
| |
|
| WLD-69 (Internal/External Siren with Strobe) |
| |
 |
|
Features:
• The visible curve of the strobe cover is designed using anthropometrics
• Rain proof, UV proof, suitable for indoor or outdoor use
• High impact (polycarbonate housing)
• Operating voltage and current:
DC 12V type: 10V-24V DC, (typical voltage) (at DC 12V)
Siren: 120mA, Strobe: 130mA
DC 24V type: 20V-28V DC, (at DC 24V)
Siren: 120mA, Strobe: 130mA
• Siren tones: siren (typical tone), sweep, hi-low
• Siren output: 110 ± 3dB (at 1 ft.)
• Size(mm): 122(L) x 73(W) x 43(H)
• Power cord: 1 ft. (AWG 24) in general
|
|
| |
|
| WLD-29 (Sirens with Strobe) |
| |
 |
|
Features:
• Its camouflage appearance disguises its actual functions, protecting itself
so it can perform its normal functions
• Rainproof, UV proof, High impact (polycarbonate housing)
• Operating voltage and current :
10VDC to 14VDC, (typical voltage : 12VDC)
Siren : 250mA, strobe : 250mA (at 12VDC)
• Siren tone : siren (typical tone)
• Siren output : 110 ± 3dB (at 1 foot)
• Size (L x W x H) : 122 x 72 x 35mm
• Power cord : 1 foot (24 AWG) in general
|
|
| |
